Shipping will be unavailable from Dec 21 to Jan 3. Orders placed during that time will be shipped the week of Jan 3.

nw2s

USB MIDI Support Part 1: The Basics

by 1
In preparation for the b2 prototyping (which will feature two front-facing USB OTG connectors), I'm furiously adding support for a few new USB devi...
Posted in nw2s-b, Tutorials

nw2s::io Unbalanced Assembly Instructions

by 1
If you would like an offline version of these instructions, you can download it here: [ddownload id="1231" button="grey" text="Download 1.1 PDF (%...
Posted in nw2s-io, Tutorials

Sample playback on the nw2s::b

by 1
Been working on the 1.0 release of the firmware that will allow normal humans to be able to program this beast of a synth. Getting stable sample pl...
Posted in Demos, nw2s-b, Tutorials

nw2s::b Main Board Assembly Guide - Step 2

by 1
## Overview The following steps should guide you through the main board assembly process. This is the harder of the two boards to assemble. [It ma...
Posted in nw2s-b, Tutorials

Extensibility

by 1
The nw2s::b is extensible through a few means. This post will outline them and how you can use them. Note that each of the listed pin headers is p...
Posted in nw2s-b, Tutorials

nw2s::b Panel Board Assembly Guide - Step 1

by 1
## Overview The following steps should guide you through the panel board assembly process. This is the easier of the two boards, so may be the bes...
Posted in nw2s-b, Tutorials

Oscillator Framework part 2: Variable Sample Frequency Wavetables

by 1
Who doesn't love a wavetable synth? Who in their right mind doesn't immediately think of a wavetable synth when cataloging the possibility tied up ...
Posted in nw2s-b, Tutorials

DAC output circuit

by 1
While I was working on another post, I made a few recordings of the signal straight off the Due DAC and then recorded the same through the output c...
Posted in nw2s-b, Tutorials

A Generalized Oscillator Framework

by 1
[color-box] ### Note This tutorial is a little more advanced for those of you wanting to get into device/algorithm development rather than just pa...
Posted in Tutorials

Uploading a Sketch with the IDE

by 1
While we're working on setting up some tools that will allow non-tech folk to upload preset-based sketches, here's a brief tutorial on how to uploa...
Posted in Tutorials

IDE Setup and Installation

by 1
[color-box color="red"] Note that the 1.5.8 version of the Arduino IDE has introduced some changes to their standard C++ libraries which are not ba...
Posted in Tutorials

Bluetooth Pairing

by 1
The nw2s::b uses the bluetooth connection for two things. 1. Uploading new sketches (really it's firmware) 2. Issuing commands to the current sket...
Posted in nw2s-b, Tutorials